Guide to Cleaning Your Air Rifle Scope correctly

Guide to Cleaning Your Air Rifle Scope correctly

Buying air rifle scopes may be the best decision you make when you arrive at your training goal. But keeping clean clean is the second best decision you’ll make.

If the scope is dirty, you may find it difficult to see at dusk or dusk. You may also have trouble seeing in the middle of the day if the lens has dust or dirt on it.

It’s important to keep the scope clean all the time so you can easily see your target. This ensures accurate fire.

Plus, clean up the scope, the longer it will last.

Let’s discuss three steps to clean your air rifle’s scope in good condition: brushing, wiping and cleaning deeply.

Round One: Brushing
Use a soft bristle brush to remove any dirt or particles attached to the surface. You can use a brush designed for the camera.

The brush should be soft and completely free of oil. Oil can damage the surface of the scope and make it harder to keep it clean.

Look for brushes that can be pulled into the case when not in use. A good brush that has a nice hat is also the right choice as it makes a clean brush between utilities.

If the brush is wet, you should throw it away and get a replacement.

Another option is to use a can of pressurized air to clean the lens when the lens is dry.

Round Two: Wipe
Next, use a microfiber cloth to remove fingerprints or smudges. The fabric should be soft and should not be made with or in contact with any chemicals. This can damage the lens surface.

The microfiber fabric has a small fiber that is much smaller than a strand of human hair.

The normal fabric has fibers that form a circle and will only smear the oil over the lens. The triangular strap gives a clean lens inside, so look for a cloth like this.

This type of fabric can prevent scratches from small particles scratched on the surface of the lens. The microfiber cloth takes particles so it does not scratch your lens.

Round Three: Deep Cleaning
For water-dried stains on the lens or pollen, use an antifungal cleanser. Place a few drops of cleanser on a tissue and rub the lens, from the inside out.

Then use clean and dry tissue to remove excess fluid.

Repeat as needed.

Just remember, be gentle and do not push too hard. Save your energy while you’re practicing.

You definitely want to make sure the cleanser is not a quick dry mix so it does not dry out when you try to clear the scope. Do not use a glass cleaner as it contains chemicals that can damage the lens.

Check the lens briefly before you finish cleaning it just to make sure the lens is not clean.

If there is still dirt, stains or particles, try again until full. It may take a little longer than you expected, but the results in the accuracy of the shot will make it worth your while.

More Tips
Never use a duster, wet paper towel or your shirt to cleanse your scope. And do not also clean it with a new toothbrush. Or the usual, in this case.

Although it seems harmless, using the wrong ingredients and products to clean the scope you can do a bad job to clean it, at best.

At worst, it can leave scratches that affect the quality of your shot. It’s like rubbing dirty sandpaper over the lens. You may have to change your scope, depending on the extent of the damage.

You should also avoid using your finger to clean up the debris. It can cause dirt to stick on the surface, and can also scratch the lens.

Keeping Your Cleaning Cleansing Kit Safe

If you do not clean your scope, be sure to keep your cleaning supplies in a clean and safe place. You do not want your cloth to collect dust that will end in its scope.

If the microfiber cloth is dirty, check if you can throw it in the washing machine and dry it. Do not use bleach or fabric softener.

Clean your air gun

It is equally important to clean your rifle as it clears your scope.

Many people think you do not need to clean the air gun, but cleaning it is the best way to keep it in top shape. It also helps the guns last longer.

If your rifle is dirty and you try to clear your scope, your scope will definitely cause dirt and dirt on it in the process.

It’s like what happens when the toast wets the floor. It is always ground facing down.

But think about it

Honest Review of RaceBets

Honest Review of RaceBets

Currently, you can log on from the comfort of your own home and have instant access to many horse races. The internet has made betting on horse racing easier than ever.

If you like betting on horse racing, maybe you’ve heard of RaceBets. This online betting platform gives users access to horse races in more than 40 countries.

You know it’s popular – but is it a trustworthy site?

Read on for RaceBets review.

1. 100% Bonus for New Customers
One of the most interesting parts of RaceBets is offering a welcome bonus to new customers. The bonus is 100% first deposit and good for up to £ 50.

To get the registration bonus, all you have to do is create an account, make your first deposit and then name it fully. You have 45 days to qualify for a bonus, and once you receive it you must use it within 30 days.

The only downside to signing up bonuses is the deposits made from Skrill and Neteller (e-wallets) do not qualify for it.

The length of time given to claim bonuses and actually use them is a great selling point. Users can feel less pressured to jump into bets after creating an account.

2. Customer Support
RaceBets has a stable customer support system that is easy to use. Live Chat feature on the website can connect customers with representatives from 9 am to 5 pm Monday to Friday.

If you experience troubleshooting issues on weekends, RaceBets provides email addresses as well; It also guarantees the response within 24 hours.

In addition to human support, RaceBets also has an entire forum on its website with common questions. If you experience a small error, this easy-to-use database lets you find answers without waiting for someone’s response.

3. Website and Mobile Site
The RaceBets site is more than satisfactory. RaceBets provides their own live streaming stream and not through third parties, and you can tell – all high quality streams. You can also reach the stream directly from the race card, which is convenient.

The website itself is easy to navigate and greatly enjoys it. The mobile version of the website also does not disappoint; while most mobile websites can have horrible configurations and appear to stretch too wide, easy downloading of RaceBets and similar to a desktop site.

Easily accessing sites via mobile phones lets you take RaceBets wherever you go.

The final verdict
RaceBets is an online betting platform that makes horse bets fun but also puts customers first.

With generous sign-up bonuses, easily accessible customer support systems and wonderful websites and websites, it’s easy to see that creators put a lot of thought into their products.

5 Things You Should Know About Kentucky Derby

5 Things You Should Know About Kentucky Derby

Kentucky Derby is one of the biggest events of the year, and is on the list of buckets that many experience directly. Of course, it is available to watch on TV, but you want to approach that action, right?

Whether you are a Derby veteran or you are planning your first trip, there are certain tips that everyone needs to know. Read on for 5 of them.

Use cash
Bring cash. Bring a ton of cash. While in this day and age, it looks like plastic is king, cash will get you much further in Kentucky Derby.

You will need cash for parking, as a starter. There’s nothing worse than going to Derby, finding a lot of things, and realizing that you do not have access to it.

In addition, most beverage sellers need cash, and you need cash to choose that free horse!

There is an ATM. However, they also come with the discomfort of waiting a very long time. Outsmart all others who do not put their pockets in green.

Thinking forward
Many people attend Derby, so it makes sense that crowds and lines will become commonplace.

If you have to use the bathroom – or you think you might have to – do not think about it. Just lined up The same is true if you want a drink, or if you need something that requires waiting.

By thinking ahead and doing a little strategic scheduling, you’ll be able to have a more enjoyable time at Derby.

Bet early
Do not waste time thinking about which horse to pick. Do not change your mind. Go with what your mother said at the time.

The gamble is very stressful, and if you are the first person, you may be nervous about it.

However, as mentioned earlier: Derby is crowded. Do not increase your nerves by delaying your bet. Immediately upon arrival, queue up to place your bet.

Bet at all!
The gamble does not have to be frightening. It’s commonplace in Kentucky Derby, so get into it!

Some important things to keep in mind:

The minimum bet is $ 2.00.
Step into the window, let’s say the number of your race and the amount of dollars you want to bet.
Declare the type of stakes and the number of the horse.
If you earn more than one bet, do another schpiel for each.

Drink
This is Kentucky Derby – you have many reasons to celebrate!

Mint juleps is the beverage of choice in Kentucky Derby, and whether you win or not, you will be able to partake of iconic history.

However, remember that you are at a relatively formal event at least, and the most high class.

Be sure to limit yourself so you do not make a fuss. What could be more embarrassing?

Conclusion
Kentucky Derby can be a great experience for everyone involved, whether you bet, ride in the air, or enjoy one of those special mint mints.

Just like any event, there is a protocol you need to follow how to do it yourself. In addition, following these tips will help you enjoy a relaxing and relaxing time at all times watching the race.

Is Nitrates in Your Food Bad For You

Is Nitrates in Your Food Bad For You

It seems that every week there is a new food problem that people are worried about. One minute experts warn people about high fructose corn syrup, and then they talk about the dangers of fat in the diet.

Recently more and more people are concerned about nitrate in food. Some people may think that the nitrates’ concern in relatively new foods, but the debate about its presence in consumables has existed since the 1970s.

Before you can understand the recent nitrate controversy, you need to take a quick science lesson.

The difference between nitrite and nitrate.
Some people use nitrites and nitrate alternatives, but they are different compounds.

Both nitrites and nitrites are organic compounds composed of nitrogen and oxygen. The main difference is that nitrate has three oxygen molecules, and nitrites have only two oxygen molecules.

Nitrate is so common that it is found naturally in soil, water, and air. They are also very versatile compounds. Is Nitrates in Your Food Bad For You

Nitrate is used in a variety of foods. They can be used for dye food, and are widely used to preserve the recovered meat and dairy products.

They are also used for industrial purposes. You can find nitrates in explosives, fertilizers, as well as some types of enamel glass.

Certainly certain compounds are used for human use and industrial purposes. But there is something about nitrates and nitrites that make them dangerous.

Unpredictable reaction
Nitrate does not cause much health risk to animals, which is when they are converted into nitrites so that everything changes.

Nitrate is a stable compound, no nitrite. When nitrate is converted to nitrite, it can turn into nitric oxide or nitrosamine. Both forms of nitrite have a carcinogenic nature and are associated with many other health problems.

Nitrosamine is only formed in certain environments, they must be close to amino acids and in high heat. Unfortunately, many popular cured meats are cooked under these conditions.

Because nitrate in food is a controversial topic, some people may wonder how things that are harmful to humans can be safely processed. Is Nitrates in Your Food Bad For You

If you want to understand the use of nitrates in a diet that you have in common, you need to think of one of the most popular American foods.

Consider hot dogs
Like many nutritious nitrates, hot dogs are American specialties. They are very popular, easily available, and cheap to produce and buy. You will find it on almost every sports or BBQ event, and cut off almost every child’s plate.

Despite the popularity of hot dogs, this is one of the worst foods you can put into your body.

If you want an example of unhealthy levels of nitrate in the diet, do not miss out on hot dogs.

Nitrate is an essential part of average heat dogs. Unlike some meat, it is very difficult to treat it without using nitrate.

There is nothing wrong with the hot dog itself. After all, it’s just meat and bread.

The real problem is their way of processing with nitrates.

Nitrates allow hot dog meat to keep pink color and prevent it from damaging too fast. Without nitrates, it is impossible to process and convey it like ours.

Nitrate in food is a new norm
Nitrates have become an integral part of the conservation process, and the effect of most of their meat like hot dogs. Nitrate is also very cheap. Using it is the easiest way to follow meat demand in this country.

Almost every kind of meat you eat, regardless of whether it is healed, has been treated with nitrates. If nitrates are just in one type of food, it will be easy, but everything is in almost everything.

High nitrate levels can be found in popular fruits and vegetables. Natural nitrates in vegetables do not cause anxiety, but synthetic nitrates.

Nitrate is a popular additive in fertilizer. Fruits and vegetables grown in soil containing nitrates can easily take excessive compounds.

Nitrate is present in food so some companies rely on the use of other additives to counteract the adverse effects.

Many people do not know this, but hot dogs are processed with vitamin C (although most companies will list them as ascorbic acid on the label) as a way to fight strong nitrates.

It may be convenient for some companies to try to reduce nitrite damage

How to solve the problem of lighting glare

How to solve the problem of lighting glare

Glare is one of the problems often encountered lamps, downlights glare which the most representative. Many designers do not understand how to avoid the glare of lamps, do not know how to choose the right anti-glare lighting.
Today teach you six kinds of methods to solve the glare. Before we begin, let’s take a look, under what circumstances, the human eye will feel the “glare” and what is the anti-glare lighting.

 

Note that the human eye sight is normal, as the top level to the bottom 30? 60 ?, glare it within this range, it is glare. As long as the light emitted from the lamp full control over the light-cutting angle> 30? of it, we can say this lighting fixture is Anti-glare ..

So, how to solve the problem of glare lighting it? Come! Learn this six strokes, glare go without a trace.

1.Cut-off angle> 30 degrees

When conventional lamp shielding angle is based on the normal human vision elevation of 30 degrees, lamp shielding angle greater than 30 degrees, in order to avoid the light directly into the eye.

2.Increasing the mounting height of the light source

Deep shine of the lamp under other structures remain unchanged, increasing the mounting height of the light source, in order to achieve the purpose of increasing the shading angle.

3.Conventional lights + cross-glare lamp shielding angle

Cross antiglare grille is mainly blocked in both directions vertical and horizontal lighting. The critical position of glare from the boundary adjustment to the center of the lamp, thereby increasing the shading angle, to achieve the purpose of anti-glare.

4.Conventional lights + antiglare honeycomb

Honeycomb grille net can block the glare of the light in all directions, all the accessories glare, anti-glare effect best, accessible shielding angle 90 ?. Light loss is greatest.

5.Conventional lights + Blackout leaves

Blackout leaves can be blocked in all directions, lights for easy shaping, forming angle from the lamp itself to completely block the lighting shielding effect, it is the most flexible apperlare accessories, is the most cool appearance plus factor.

Because large parts, usually used in conjunction with track lights, glare at the same time, enhance the overall image of the decoration.

6.Soft Glass

Including soft frosted glass, wove glass, Gyrosigma + frosted glass, etc., can to a certain extent, reduce the brightness of the surface lighting source, to a certain extent, to achieve anti-glare effect.

Well, learn this six strokes, no more glare, Anti-glare is so easy!

At end, I want to introduce we change the lens angle to make the Anti-glare.

LED cooling technology and cooling materials

LED cooling technology and cooling materials

Heat dissipation is a major factor affecting the intensity of LED lighting. Heat sink can solve the problem of heat dissipation of low illumination LED lamps. A heat sink can not solve the 75W or 100W LED lighting cooling problem.
In order to achieve the desired illumination intensity, active cooling technology must be used to solve the heat by LED lamp assembly. Some active cooling solutions as LED lamps. In order to provide a practical active cooling solution for high brightness LED lamps, the heat dissipation technology must be low energy consumption; and can be applied to small lamps; its life is similar to or higher than the light source.

 

Cooling method

Generally speaking, in accordance with the way from the radiator to take away the heat, the radiator can be divided into active cooling and passive cooling. The so-called passive heat, is through the heat sink of heat source LED light source naturally distributed to the air, the cooling effect is proportional to the size of the heat sink, the effect of course greatly reduced heat , often used in the space of the heat dissipation, such as some popular motherboards in the North Bridge also take a passive cooling, the vast majority of take the initiative to heat, active cooling is through the fan and other cooling equipment forced The heat will be out of the heat sink, which is characterized by high thermal efficiency, and equipment, small size.

Active cooling, subdivided from the way heat can be divided into air-cooled heat, cooling heat, heat pipe cooling, semiconductor refrigeration, chemical refrigeration and so on.

Air-cooled air cooling is the most common way of cooling, in comparison, is also cheaper way. Air cooling is essentially a fan that takes away the heat absorbed by the radiator. With the price is relatively low, easy installation and so on. But the environmental dependence is relatively high, as the temperature rise and overclocking its thermal performance will be greatly affected.

Liquid cool

Liquid cooling heat is driven by the liquid in the pump driven by the heat to take away the radiator, compared with the air-cooled, with a quiet, cooling stability, the advantages of small dependence on the environment and so on. The price of liquid cooling is relatively high, and the installation is also relatively cumbersome. At the same time as installed in instructions to install the instructions in order to get the best cooling effect. For cost and ease of use considerations, liquid cooling is commonly used as a heat-conducting liquid, so liquid-cooled radiators are often referred to as water-cooled radiators.

Heat pipe

The heat pipe is a kind of heat transfer element which makes full use of the heat conduction principle and the rapid heat transfer property of the refrigerant. It conveys heat by evaporation and condensation of the liquid in the fully enclosed vacuum tube, has extremely high thermal conductivity, good isothermal The heat transfer area on both sides of the hot and cold can be arbitrarily changed, can be a long distance heat transfer, can control the temperature and a series of advantages, and heat pipe composed of heat exchanger with high heat transfer efficiency, compact structure, advantage. Its thermal conductivity has far exceeded the thermal conductivity of any known metal.

Semiconductor refrigeration

Semiconductor refrigeration is the use of a special semiconductor cooling film in the electricity generated as the high temperature side of the heat can be also distributed, the low temperature side is constantly cooling. A temperature difference is generated on each part of the semiconductor particles, and a cooling sheet is formed by the concatenating dozens of such particles as the form of temperature difference on both surfaces of the cooling sheet. The use of this temperature phenomenon, with the air-cooled / water-cooled high-temperature side of the cooling, can get excellent cooling effect. Semiconductor cooling has the advantages of low cooling temperature and high reliability. The cold surface temperature can reach below 10, but the cost is too high, and the process of semiconductor refrigeration is not mature enough practical.

Chemical refrigeration

The so-called chemical refrigeration, the use of some ultra-low temperature chemical substances, the use of them in the melting time to absorb a lot of heat to reduce the temperature. It is more common to use dry ice and liquid nitrogen. Such as the use of dry ice can be reduced to below 20? temperature, there are some more ‘abnormal’ player

Accounting Firm Enjoys Being Ranked Among The Top 100

Accounting Firm Enjoys Being Ranked Among The Top 100

Dublin accounting services
The Dublin branch of a topnotch accounting subsidiary of the highly renowned Ohio accounting firm, Rea & Associates, Inc. enjoys the firm’s inclusion in the Accounting Today 2017 Top 100 Firms list and in the INSIDE Public Accounting (IPA) 2017 Top 100 CPA Firms list. The firm is based in New Philadelphia where it offers a full range of financial consultation and accounting services to individuals and businesses.

 

Joining the company in 1992 after a successful merger between Rea & Associates, Inc and a smaller 2-partner accounting company, the Dublin office of the CPA firm has enjoyed marvelous success since its inception. Today, the company primarily serves Franklin, Union, Delaware, Licking, Fairfield, Pickaway and Madison counties.

In March of this year, the nationally recognized accounting industry publication Accounting Today ranked Rea 98th in its 2017 Top 100 Firms list. The annual publication also observed that the Ohio CPA firm is “the 16th largest firm in the Great Lakes Region, which includes Illinois, Indiana, Michigan and Ohio.” Early last month, Rea was ranked 97 on The Platt Group’s INSIDE Public Accounting (IPA) 2017 Top 100 CPA Firms list. The company was also featured on the IPA 100 Fastest-Growing Firms list, “which identifies the 10 fastest-growing firms based on reported organic growth in net revenue, without the influence of mergers.”

Since Rea established its Dublin office more than 15 years ago, the team has worked fervently to ensure customer satisfaction by providing high quality service and customer care. In 2000, Rea & Associates created and adopted a set of business values called “The Rea Way” which serves to uphold the original vision of the firm’s founder, Richard Rea. Because of their emphasis on ethical business practices and exemplary service delivery, the comprehensive ideals outlined in The Rea Way have earned the corporation a solid reputation in the accounting industry. Anyone wishing to read reviews can do so at

Bitcoin the New Currency Becomes a Standard

Bitcoin the New Currency Becomes a Standard

Bitcoin is the new currency that has finally come around as a standard for payment by over 100,000 merchants. It’s an exciting new way to pay for goods or invest. Investing in bitcoins or buying goods requires the purchaser to have bitcoins to trade with. There are several ways to get bitcoins.
One way is to buy bitcoins from a bitcoin exchange. If you choose this way it’s best to find a licensed vendor. There are many vendors now who are licensed in their jurisdictions to trade bitcoin. Check in your locale for licensed bitcoin vendors.

 

Another popular way to get bitcoins is by exchanging them for gift cards. Amazon, iTunes, even Starbucks all offer gift cards that can be exchanged for bitcoins. One of the most popular sites for this is Paxful. Once you sign up for an account you can then trade gift cards for bitcoins. Or use your cash to buy gift cards. For example, if you have a $50 gift card from iTunes, you put your request out there and Paxful will hook you up with a seller. You will almost never get $50 of bitcoins since the seller now has to somehow get their money back on the gift card but you may get $45 in bitcoin for $50. Deals vary from seller to seller. The cool thing about gift cards is you only need the gift card and receipt. No names are exchanged it’s a completely encrypted transaction. Hence the name cryptocurrency.

The drawback of cryptocurrency is it can be used for money laundering and hiding money in general. China, while it hasn’t banned cryptocurrency, has stopped bitcoin ICOS. Some of their exchanges have closed. Bitcoin in China trades at a discount to the rest of the world. Japan, on the other hand, has added more than 10 places to legally exchange bitcoin adding another option for the bitcoin buy/sell experience.

$20 of bitcoin in 2008 is now worth over $20,000,000. The bubble may burst or just fluctuate but it looks like bitcoin is here to stay.

For those who are looking to invest, getting bitcoin is pretty much the same. Buyers need to go to an exchange and buy the coins. Some places allow credit cards, Paypal and bank transfers. After that the bitcoin is yours to hold and sell dear! Whether using bitcoins for making purchases or investing or selling, it’s an exciting new entry in the world of currency.

Sax LLP Announces Cybersecurity Update For September 20th

Sax LLP Announces Cybersecurity Update For September 20th

 

Matthew Boley – Sax PR2 C717 c
Sax LLP, a prestigious accounting, tax, and advisory firm based in Clifton, NJ, has recently announced that it will be providing an update on cybersecurity. Sax LLP stated that the update will take place at 8:00 a.m. on September 20th, ending at 10:30 a.m. The company stated that the briefing will be held at the Sax office, which is located at 855 Valley Rd., Floor 3, Clifton, NJ, 07013.

 

Sax LLP went on to state that the cybersecurity update is being held in response to recent cyber-attacks and threats across the United States which have received significant news coverage lately. Sax LLP stated that its goal is to help people prepare for and prevent cyber-attacks. Sax LLP stated that attendees will gain valuable insights on a variety of topics, from understanding their organization’s existing security posture and how it is exposed, to best practices to protect their organization and the newer solutions that can help.

Sax LLP further clarified its announcement by stating that the update will examine the current state of cybersecurity, discussing such issues as threats (the many types of “wares”, and where vulnerabilities lie), identifying phishing and vishing attempts, how to mitigate security breaches, Defense in Depth, also called The Castle Approach (how security is layered) and what to do if software is compromised.

Sax LLP stated that the session will be conducted by its Chief Technology Officer, Matthew Hahn. The company went on to state that Mr. Hahn has over 26 years of IT experience, and is an expert on cybersecurity. Sax LLP also stated that Mr. Hahn has made several keynote addresses in the New York metro area, and has been published in several journals.

Sax LLP closed its announcement by providing some company information. Sax LLP stated that they are a multi-disciplinary accounting, tax, and advisory firm with offices in New Jersey and New York City. Company reviews can be seen at

Alertness from XiaoMi Success, see lighting industry

Alertness from XiaoMi Success, see lighting industry

LED lighting Manufacture development A recent article said millet destroy “Chinese manufacturing”, is the punchline: “when the other side of the United States through the knowledge economy strides to promote economic recovery, we are thinking of the Internet bubble hysterical carnival.” The author is cursed by the evil spirit “the Internet thinking” the trouble to the whole manufacturing industry “blindly, flashy without substance” impetuous environment, while millet company is using the Internet thinking mode of walking in the forefront of the typical success, the lighting inside completely ready to hook up. The LED lighting industry needs an example like this to drive the entire market.
However, in the Internet age, millet success is a pioneer or martyrs, it is difficult to distinguish clearly. Millet’s success and see, just four and a half years on the global mobile phone supplier third throne, the valuation is jumped to $40 billion, becoming by far the fastest growing mobile phone brand, has gone global, to challenge Apple’s courage and determination. The lighting companies, all eager to replicate this success in their own body, but many industry insiders said that at the present stage of development of the “O2O” mode is not very mature, the concept of O2O is far greater than the actual operation, select the “O2O” model can be described as lighting companies, opportunities and challenges coexist!

 

It is a reminder that people need not be brainwashed in lighting, not impetuous wind industry become dizzy with success attitude is the pros and cons of time to talk about the effect of millet success.

First, the potential energy of the case is a little empty

This year the traditional economic bland, most of the traditional enterprises to dafanshenzhang hopes in the transformation and upgrading of the Internet. Many traditional enterprise boss cornered, to find a breakthrough, they have set up the new media department, playing micro-blog WeChat from the media, fans, etc. to engage in social economy, a lot of costly, less effective? Can taste the sweetness through the development of new media, the traditional gene in most of the enterprises due to the ingrained, trying to do new media after a period of time, finally in front of KPI assessment heroic dead ends.

The reason is very simple, the Internet thinking is a proposition on the “road”, many enterprises as “technology” to use. Millet company as a a enterprise, pioneered the use of the new economic model has been successful, with the example of potential energy, is a trendy avant-garde “business model” and “flexible marketing play” shapes such as: pre electricity, hunger marketing, channel control, fans economy become a new play, cross Model company, by many enterprises learn to imitate. For a time, a nationwide upsurge of millet, all walks of life are learning millet, various business school professors and training professors are taking millet as an example. In this example the potential of millet, wearing gold and silver, without any input from the media lies in the author’s works, science and technology media headlines and netizens talk at leisure. These are LED enterprises do not have the resources, we take what compared with millet?

Many LED business owners may wonder, why millet, carved sirloin and Huang Taiji, three squirrels and other enterprises, can be successful, and we can’t just be? Because most of the successful cases of stimulated nerve, did not translate into actual operational measures. Taste good, stumbled on the back, take a impetuous psychological speculation play commercial feasible? The so-called gehangrugeshan, LED lighting is not fast consumer products, more need is the product of the precipitation!

Two, pre purchase electricity supplier addiction

When the millet company was founded, in the face of a relatively heavy hardware industry, congenital lack of confidence, lack of capital investment, supply chain negotiation ability is poor, the risk of investment mistakes of bankruptcy is too big, how to do? Millet was through the media for preheating, fans online community forum training, according to a predetermined amount of fans then, quantitative orders to suppliers, then batch sales. The advantage of this is light assets, less investment risk, bad is addictive. Arguably, millet is now strong capital, not bad money, but millet still used the “pre supplier of the play, especially in the new release will adopt this model, like millet 4 of these new market demand products will do. Why, this is illogical ah, millet 4 sold so well, not to fully open to buy, banzhebanyan is?

Because the pre purchase electricity supplier can be the consumer’s purchase time delineated at the same time point, so as to create a second, 1 minutes 500 thousand sold out of the “expl